SELECT COMPRESSOR BY NUMBER OF USERS

 

Select 1 USER if you have 1 chair or operatory.

Select 2 USERS if you have 1-2 chairs or operatories.

Select 3-4 USERS if you have 3-5 chairs or operatories.

Select 5-6 USERS if you have 5-7 chairs or operatories.

 

Subcategories

  • 1 User

    It's all about CFM (cubic feet per minute) and less about the tank size.

    A 1.0 Hp Dental air compressor is required to support one (1) chair or operatory.

     

    Model Definitions:

    ·        8010DSPC = 80% Dryer, 40 decibels, 8 Gal, 1 Hp in Sound Proof Cabinet

    ·        8010DSPCAD = 80% Dryer, 40 decibels, 8 Gal, 1 Hp in Sound Proof Cabinet & Automatic Drain Valve

    ·        10010DC = 80% Dryer, 60 decibels, 10 Gal, 1 Hp

    ·        10010DCAD = 80% Dryer, 60 decibels, 10 Gal, 1 Hp & Automatic Drain Valve

    ·        10010LFDC = 80% Dryer, 60 decibels, 10 Gal, 1 Hp & Long Life Motor 

     

    NOTE: To efficiently operate (1) each Dental Milling Machine continuously a 4.0 HP model is typically required.  1.0 Hp air compressor should NOT be used for Dental Milling. A 2.0 Hp air compressor can only provide ~2 CFM CONTINUOUSLY for approximately 1 hour.

  • 2 Users

    It's all about CFM (cubic feet per minute) and less about the tank size. A 2.0 Hp Dental air compressor is required to support two (2) chairs or operatory users.

     

    Standard 80% DRY AIR and 98% DRY AIR (ISO 8573  3-2-1) air compressor models are available. Select models feature a Sound Proof Cabinet which lowers decibel noise levels by an additional 10 dBA on average.

     

    Model Definitions:

    ·        10020DC = 80% Air Dryer, 70 decibels, 10 Gal, 2 Hp, 110 volts (10020DC-22060 is 220 volt model)

    ·        10020DCAD = 80% Air Dryer, 70 decibels, 10 Gal, 2 Hp & Automatic Drain Valve, 110 volts (10020DCAD-22060 is 220 volt model)

    ·        10020HDCADC = Horizontal Tank, 98% Air Dryer, 70 decibels, 10 Gal, 2 Hp & Automatic Drain Valve

    ·        10020DSPC = 80% Air Dryer, 58 decibels, 10 Gal, 2 Hp in Sound Proof Cabinet

    ·        10020DSPCAD = 80% Air Dryer, 58 decibels, 10 Gal, 2 Hp in Sound Proof Cabinet & Automatic Drain Valve

     

    NOTE: To efficiently operate (1) each Dental Milling Machine continuously a 4.0 HP model is typically required.  1.0 Hp air compressor should NOT be used for Dental Milling. A 2.0 Hp air compressor can only provide ~2 CFM CONTINUOUSLY for approximately 1 hour.

  • 3-4 Users

    It's all about CFM (cubic feet per minute) and less about the tank size.  A 4.0 Hp Dental air compressor is required to support 3-4 chairs or operatory users.

     

    Standard 80% DRY AIR and 98% DRY AIR (ISO 8573  3-2-1) air compressor models are available.  Select models feature a Sound Proof Cabinet which lowers decibel noise levels by an additional 10 dBA on average.

     

    Model Definitions:

    ·        20040DSPCAD = 80% Dryer, 65 decibels, 20 Gal, 4 Hp in Sound Proof Cabinet & Automatic Drain Valve

    ·        20040DSPCADC = 98% Dryer, 65 decibels, 20 Gal, 4 Hp in Sound Proof Cabinet & Automatic Drain Valve

    ·        20040DC = 80% Air Dryer, 75 decibels, 20 Gal, 4 Hp

    ·        20040DCAD = 80% Air Dryer, 75 decibels, 20 Gal, 4 Hp & Automatic Drain Valve

    ·        20040DCADC = 98% Air Dryer, , 75 decibels, 20 Gal, 4 Hp & Automatic Drain Valve

    ·        60040DCAD = 80% Air Dryer, 75 decibels, 60 Gal, 4 Hp & Automatic Drain Valve

    ·        60040DCADC = 98% Air Dryer, , 75 decibels, 60 Gal, 4 Hp & Automatic Drain Valve

     

    NOTE: To efficiently operate (1) each Dental Milling Machine continuously a 4.0 HP model is typically required.  1.0 Hp air compressor should NOT be used for Dental Milling. A 2.0 Hp air compressor can only provide ~2 CFM CONTINUOUSLY for approximately 1 hour.

  • 5-6 Users

    It's all about CFM (cubic feet per minute) and less about the tank size.  A 6.0 Hp Dental air compressor is required to support 5-7 chairs or operatory users.

     

    98% DRY AIR (ISO 8573  3-2-1) air compressor models are available.

     

    Model Definitions:

    ·        20040DCC = 98% Air Dryer, 78 decibels, 20 Gal, 6 Hp, 12-16 cfm

     

    NOTE: To efficiently operate (1) each Dental Milling Machine continuously a 4.0 HP or 6.0 HP model is typically required.  1.0 Hp air compressor should NOT be used for Dental Milling. A 2.0 Hp air compressor can only provide ~2 CFM CONTINUOUSLY for approximately 1 hour.

There are 21 products.

Showing 1-12 of 21 item(s)

Active filters